Midea Heat Pump Distributor Ontario

🏠

How many zones do you need?

Each zone serves one indoor unit. Select the total number of separately controlled spaces in the project.

Zones

Two indoor units — small home, condo, or addition

Zones

Three indoor units — typical bungalow or open-concept upper floor

Zones

Four indoor units — full home with bedrooms + main living areas

Zones

Five indoor units — large home, multi-floor, or light commercial

Zones

Six indoor units — Xtreme Heat series only · estate or light commercial

📐

Configure each zone

Specify the room type and approximate square footage. We'll calculate the required BTU automatically.

💡 BTU is calculated using a standard 25 BTU per sq ft baseline, adjusted for room type. For sun-exposed rooms, kitchens, or high-ceiling spaces, consider sizing up.

❄️

Select indoor units

For each zone, choose an indoor unit type and SKU. Compatible BTU options are highlighted.

📋 Recommended SKUs match your calculated BTU requirement. You may oversize within ±20% if precise sizing isn't available.

🎯

System match

Choose your climate priority and select the compatible outdoor unit for this configuration.

Climate Priority

⚖️

Balanced Cool & Heat

Down to −13°F / −25°C

Equal cooling and heating performance. Optimal for southern Ontario, GTA, and moderate Canadian climates with mild winters.

🔥

Extreme Heat

Down to −22°F / −30°C

Cold-climate heat pump. Sustains 100% rated heat capacity at 5°F. Ideal for Northern Ontario, Quebec, Prairies, and Atlantic Canada.

Compatible Outdoor Units

Select a climate priority to view compatible outdoor units.

ASCEND GROUP

Midea Master Distributor · Canada

Multi-Zone Architect V1.2

System Specification ·

📋

System Configuration Summary

Ascend Group · Multi-Zone Project Specification

CLIMATE PRIORITY

OUTDOOR UNIT

INDOOR ZONES

System Capacity Utilization 0 / 0 BTU

Ready to move forward?

Submit this configuration to your Ascend dealer team for pricing and lead-time confirmation.

Final system sizing should be verified by a licensed HVAC professional based on Manual J load calculation, building envelope, and local climate data. Specifications subject to change. © Ascend Group · Midea Master Distributor of Canada · Multi-Zone Architect V1.2

Notes & Disclaimers

This tool provides planning-stage estimates to help scope a multi-zone configuration. Final system design and selection must be confirmed by a licensed HVAC professional before purchase or installation.

BTU sizing is an estimate. Calculations use a 25 BTU/sq ft baseline adjusted for room type. Actual heating & cooling loads vary with insulation, glazing, sun exposure, ceiling height, occupancy, and air infiltration.
Manual J recommended. Final sizing should be verified through a Manual J load calculation performed by a qualified HVAC contractor per ACCA standards.
Specifications may change. Performance ratings, certifications, model availability, and lead-times are subject to change without notice. Confirm current details with Ascend Group prior to ordering.
Installation considerations. Refrigerant line lengths, electrical service, condensate handling, mounting clearances, and outdoor unit placement must comply with the manufacturer’s installation manual and applicable provincial codes.
Not a quotation. This output is a reference document only. It does not constitute a quote, contract, warranty, or commitment of pricing, availability, or lead-time.
Need professional support? For confirmed pricing, dealer placement, or design review, contact sales@ascend-group.ca or your local Ascend-authorized HVAC professional.

Multi-Zone Architect V1.2

Climate Priority

Compatible Outdoor Units

System Configuration Summary

Ready to move forward?

Notes & Disclaimers

Products

Warranty & Support

Contact

Head Office & Flagship Store

Ottawa Store

London Store

1-866-866-4332